15 Tips Your Boss Would Like You To Know You Knew About Repairs To Upvc Windows
Repairs to uPVC Windows
uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They don't decay or rust as timber and aluminum.
Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce unnecessary repair costs and increase energy efficiency.
1. Broken Glass
The damaged glass in your windows could cause severe damage to your home and even be fatal. You should take the time to make sure that your windows are in good working order.
For single pane windows, it can be relatively simple to replace windows, and the new one will usually fit inside the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it will be difficult to remove and replace the old panes. In this instance you'll need to locate some plastic spacers that assist the new pane to fit properly into the frame of the window.
If you're planning attempt to remove the window panes by yourself it is important to wear appropriate safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the glass so that any fragments of glass fall onto the fabric rather than on the floor, where they could be trampled on and cause further damage.
It's a great idea seal the gap after the glass has been removed. This will stop drafts and water from entering your property until a professional is able to fix the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the distance between the window and the door is significant, you may prefer an alarm system that has windows. This will give you the best of both.
2. Sagging
uPVC is a durable and energy efficient alternative to timber sash windows. However, with time, they may be afflicted by a variety of issues, including sagging. A sagging uPVC window can cause issues with light, draughts and even security. It is crucial to act when you notice your uPVC windows are sagging.
Repositioning the hinges could aid in fixing a window which is sliding. You'll first need to open the windows so you can reach the frame. After that, using the screwdriver, you'll be able to take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, shut your window and check for an appropriate fit. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in the right place.
If you aren't able to move the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loose their elasticity. It is crucial to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.
UPVC handles can also become loose. Often, this is caused by screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to close the window and then perform a test fitting. The corner joints of the sash must be aligned with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle and return the mechanism to its original the position it was in.
3. Water Leaks
If you're waking up to damp floors and mouldy walls every time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.
It is a fairly easy fix that can be done by any DIY expert. Depending on how severe the issue is, the old caulking may have to be removed. It is important to remember that when it is about uPVC window repair s, do avoid the temptation to "over-caulk in order to make the area more difficult to clean and can reduce your energy efficiency.
Verify that the drainage holes have no debris in them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you might have to consider replacing the window.
Moldy sills and rotten ones are another sign of water leakage. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.
It is also important to remember that if the leakage originates from the glass of your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. This can be easily fixed by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
Hinges could be the reason when your uPVC window is difficult to open or it blows open with the breeze. These are easily repaired by any skilled DIYer and are usually completed in a matter of minutes.
Like any mechanical component, hinges can be damaged over time. It's very simple to change the hinges on a window however it is simpler if you have someone to help you to hold the frame.
It is also important to ensure that the uPVC hinges are opened and closed in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.
The problem can be caused due to opening the window in the wrong way or by a poor installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are happy to give suggestions.
It is also essential to grease the hinges regularly. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. This must be done at a minimum every year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.
5. Draughts
Draughts can be caused by several different causes. The hinges, also due to wear and tear could become misaligned. This causes gaps to develop where the sash joins the frame. If they are beyond repair, it could be necessary to get them re-aligned. Secondly the interlock, this is on the hinge side of the window, may also be misaligned, and again it may be possible to give them a clean but in certain cases, it may be necessary to get them replaced.
These seals can wear down or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Another option is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures, and also reduce the possibility of draughts.
Another method of reducing drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. They will keep your home warm by blocking out cold air.
With a little maintenance and repairs, your upvc windows will provide a great level of security and insulation for your home. It is crucial to recognize that all windows have a lifespan and they may reach an point at which it is more cost-effective to replace them rather than repair them. If you are experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional as soon as you can.